Reflective "Chevron Strips" for Diamond Plate NFPA
Quantity 1 = 24 strips (1 square foot of coverage)
This is our newest product. Our "Chevron Strips" are the quickest and easiest way to create reflective chevron stripes on diamond plate or tread plate. (Based on our experience installation is about 4 times quicker than dots.) Our chevron strips for diamond plate also create cleaner nicer looking chevrons. These custom designed shapes are cut from Reflexite/Orafol V98 prismatic material. This material is specifically designed for emergency vehicles. It is a single layer patented film and will not delaminate like other brands. Reflexite invented prismatic reflective films and is the leader in this type of material. It is the only film we use for our custom shapes. Click Here to use our diamond plate shape calculator.
NOTE - to assure a proper fit, you should test a free sample on your diamond plate before purchasing. When you order our sample pack you will get one of each and they will be marked A, B, C or D. This will insure that you get a perfect fit. (see link below)
This product comes in four styles, A, B, C and D. Style A is for diamond plate where the tips are exactly 1" plus 1/32 apart. Style B is for diamond plate where the tips are exactly 1" apart. Style C is for diamond plate where the tips are 1" less 1/32" apart. Style D is for diamond plate where the tips are 1" less 1/16" apart.
To install our "chevron strips" you simply peel, position, and press on. Each strip takes just a few seconds to install. The design is made to go around the diamonds.
Testing the strips before purchasing is highly recommended. To get a sample pack of our diamond plate reflective products cut from V98 material just email me at email@example.com or call 850-934-3157.
We sell this product based on the square foot coverage. One square foot of coverage or 24 strips runs $18. This makes it simple to estimate how many strips you need. Just measure the area you need to stripe and calculate how many square feet you have. If you have 10 square feet you would need 5 square feet of red strips and 5 square feet of fluorescent lime.
How to Order
This product comes in four styles, A, B, C and D to accomodate different diamond plate spacings. When you order our sample pack you will get one of each and they will be marked A, B, C or D. Testing the strips ahead of time will insure that you get a perfect fit. Since the strips are not returnable it is important to test first before ordering. There is a drop down box below where you can choose the style that fits.
Our Reflective Chevron Strips run $18 per square foot of coverage or 24 strips. A 12" x 12" area of diamond plate would require 1 square foot of strips ($18). You can make your square footage selection below in the little box.
As an example, for 10 square feet you would need 5 square feet of red and 5 of lime. So for 5 square feet of red you would enter 5 in the box below and select red and then click "add to cart". Then do the same for fluorescent lime. (Each time you would need to specify the size/style that fits you diamond plate.)
To read our article on how to estimate the number of shapes you will need for your diamond plate click here.
- In the ordering section below you will first choose the color.
- Then you will choose the style (size) you need (A,B,C,D) based upon a test of your diamond plate.
- Then you will enter the number of square feet that you need to cover in the little box.
If you have any questions just call at 850-934-3157 or email me.